Pos : 12.22 /9 Wartung/Ins tandsetzung/T abelle Wartungsinter vall e, Ü berschrift @ 0\mod_1263810791405_131.doc x @ 1564 @ 2 @ 1
9.2
Maintenance intervals table
Pos : 12.23 /9 Wartung/Ins tandsetzung/RI/Tabelle Wartungsi nter vall RI 311 W @ 3\mod_1353047762342_131.doc x @ 34452 @ @ 1
Interval
daily
weekly
monthly
annually
Pos : 12.24 /1 Grundlegende Sic her hei tshi nweise/Signal wort-F eld "Hinweis" @ 0\mod_1261404960439_131.doc x @ 905 @ @ 1
Pos : 12.25 /9 Wartung/Ins tandsetzung/R einigung Gerät @ 2 \mod_1340195497910_131.doc x @ 17554 @ 2 @ 1
9.3
Cleaning
Dust on the appliance must be avoided and must be removed by regularly cleaning.
Before cleaning the device, be sure to switch off the motor protection switch and unplug the device from the
power supply. Cleaning can take place with a damp cloth or a suitable industrial vacuum cleaner. Do not use
solvents such as thinner, alcohol or benzene. Never immerse the device in water.
Pos : 12.26 /0 Allgemeines/Sei tenumbruch @ 0\mod_1265272007940_0.doc x @ 2191 @ @ 1
24/53
Check
Suction hose leaking? (see List of
wear parts)
Collection container full?
Pocket filter contaminated? (see List of
wear parts)
Seal between drive unit and collection
container (see List of wear parts)
Collection container
Suction hose
Check carbon brushes (see List of
wear parts)
Discharge flap seal (see List of wear
parts)
Drive unit
Pocket filter (see List of wear parts)
Replace hose
Empty collection container
Operate manual shaker
Clean or replace seal
clean
clean
Replace on demand
check
BGV A3 inspection
Clean / replace
NOTICE
Maintenance/Repair
Measure