Sony STR-DG510 Operating Instructions Manual page 69

6)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down TUNING
MODE, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Video section
Inputs/Outputs
Video: 1 Vp-p/75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
P
B
P
R
80 MHz HD Pass Through
General
Power requirements
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50/60 Hz
AU 240 V AC, 50 Hz
KR, TH6 220 – 230 V AC, 50/60 Hz
E2 120/220/240 V AC,
50/60 Hz
TW 110 V AC, 60 Hz
SP 230 – 240 V AC, 50/60 Hz
Power consumption
Area code Power consumption
U, CEL, CEK, AU, 220 W
KR, E2
CA 300 VA
TH6, SP 200 W
TW 500 W
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
430.5 × 157.5 × 309 mm
(16 7/8 × 6 2/8 × 12 1/8
inches) including
projecting parts and
controls
Mass (Approx.) 7.7 kg (16 lb 16 oz)
/C : 0.7 Vp-p/75 ohms
B
/C : 0.7 Vp-p/75 ohms
R
Supplied accessories
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander RM-AAU013 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2 or
ECM-AC2a) (1)
For details on the area code of the
component you are using, see page 3.
Design and specifications are subject to
change without notice.
69 GB