Calibrating The Appropriate Speaker Settings Automatically (Auto Calibration) - Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual

Selecting the front speaker
system
You can select the front speakers you want to
drive.
Be sure to use the buttons on the receiver for
this operation.
SPEAKERS
Press SPEAKERS repeatedly to
select the front speaker system
you want to drive.
You can confirm the selected speakers
terminals by checking the indicator on the
display.
When select the front speakers
connected to
The SPEAKERS FRONT A
terminals
The SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/
FRONT B terminals
Both the SPEAKERS FRONT A and
SPEAKERS SURROUND BACK/
FRONT HIGH/BI-AMP/FRONT B
terminals (parallel connection)
* To select "SP B" or "SP A B", set "Sur Back
Assign" to "SPEAKER B" in the Speaker Settings
menu (page 41).
To turn off the speaker output
Press SPEAKERS repeatedly until the "SP A"
and "SP B" indicators on the display do not
light up. "SPK OFF" appears on the display.
Note
You cannot switch the front speaker system by
pressing SPEAKERS when the headphones are
connected.
GB
42
Calibrating the
appropriate speaker
settings automatically
(Auto Calibration)
This receiver is equipped with DCAC (Digital
Cinema Auto Calibration) function which
allows you to perform automatic calibration as
follows:
• Check the connection between each speaker
and the receiver.
• Adjust the speaker level.
• Measure the distance of each speaker from
your seating position.
• Measure the speaker size.
• Measure the speaker polarity.
• Measure the frequency characteristics.
a)
The measurement result is not utilized when
"A. DIRECT" is selected.
b)
The measurement result is not utilized when
signals with a sampling frequency of more than
Light up
96 kHz are being received.
c)
The measurement result is not utilized when
signals with a sampling frequency of more than
SP A
48 kHz are being received.
SP B*
The DCAC is designed to obtain proper sound
balance in your room. However, you can
adjust the speaker levels manually according
SP A B*
to your preference. For details, see "Test
Tone" (page 111).
a)b)
a)
a)
a)c)