Watching Component Images From; (Component Video Assign) - Sony STR-DG700 Operating Instructions Manual

Watching component
images from other inputs

(COMPONENT VIDEO ASSIGN)

You can reassign a component video input to
another input.
1
Press AMP, then press MENU.
"1-LEVEL" appears on the display.
2
Press control button V/v
repeatedly to select "6-VIDEO".
3
Press the control button or
control button b to enter the
menu.
4
Press control button V/v
repeatedly to select
"COMP. V. A.".
5
Press the control button or
control button b to enter the
parameter.
6
Press control button V/v
repeatedly to select the
component video input you
want to reassign (for example,
DVD).
7
Press the control button or
control button b to enter your
selection.
8
Press control button V/v
repeatedly to select the input
you want the component video
input selected in step 6 to be
reassigned to (for example,
VIDEO 1).
In this case, select "DVD–VD1".
When you press VIDEO 1, the image
from the component connected to the
VIDEO 1 jacks will be a component
image. The input you can reassign to
varies for each component video input.
For details, see "Assignable inputs for
component video input" below.
To return to the previous display
Press control button B.
Assignable inputs for
component video input
Component Assignable
video input inputs
DVD VIDEO 1
VIDEO 3
DVD
MD/TAPE
SA-CD/CD
AUX
VIDEO 2 VIDEO 1
VIDEO 2
VIDEO 3
MD/TAPE
SA-CD/CD
AUX
Notes
• You cannot reassign more than one component
video input to the same input.
• You cannot use the component video input as the
original input when it has been reassigned to
another input.
Display
DVD–VD1
DVD–VD3
DVD–DVD
DVD–MD
DVD–CD
DVD–AUX
VD2–VD1
VD2–VD2
VD2–VD3
VD2–MD
VD2–CD
VD2–AUX
65
GB