Tuner Operations; Listening To Fm/Am Radio - Sony STR-DG1100 Operating Instructions Manual

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 34).
Tip
The tuning scale for direct tuning is shown below.
• FM band 100 kHz
• AM band 10 kHz*
* The AM tuning scale can be changed (page 124).
Automatic tuning
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 37).
2
Press V/v repeatedly to select
"FM" or "AM," then press
b.
The FM or AM menu list appears on the
TV screen.
3
Press V/v to select "Auto
Tuning," then press
4
1
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1
Press OPTIONS.
2-4
2
Press V/v to select "FM Mode," then
press
3
Press V/v to select "MONO," then
press
.
.
.
or
75 GB