8: Setting The Speakers - Sony STR-DG1100 Operating Instructions Manual

8: Setting the speakers

Setting the speaker impedances
Set the appropriate speaker impedance for the
speakers you are using.
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 37).
2
Press V/v repeatedly to select
"Settings," then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Speaker," then press
40
GB
4
Press V/v repeatedly to select
"Impedance," then press
1
5
Press V/v repeatedly to select
"4 Ω" or "8 Ω" depending on
the speakers you are using,
2-5
then press
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a normal
or b.
impedance of 8 ohms or higher, set "Impedance" to
"8 Ω." When connecting other types of speakers,
set it to "4 Ω."
• When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
or b.
speakers with a normal impedance of 8 ohms or
higher.
.
.