Changed And Added Programming; Introduction; Flexible Numbering; Ucd Time Table - Panasonic KX-TD816JT Programming Manual

2.1 Changed and Added Programming

2.1 Changed and Added Programming
Section or
Programming Address

Introduction

[016]
DISA/TIE User Codes
[100]

Flexible Numbering

[127]

UCD Time Table

[216]
Message Waiting Ring
Interval Time
[811]
DISA/TIE User Codes
[990]
System Additional
Information
[991]
COS Additional Information

Default Values

70
Changing or Additional Information
About this Programming Guide (Additional)
• ETS 300 130 Malicious Call Identification (MCID) supplementary
service.
• ETS 300 359 Completion of Calls to Busy Subscriber (CCBS)
supplementary service.
This programme is added. For details, refer to page 71.
Feature Number List (Additional)
Number
38 External feature access/
Cancellation of Automatic Callback Busy/
Cancellation of CCBS
89 MCID
Selection (Changing)
01 through 89
In the Description section, the RT is changed as follows.
RT: Returns to the top/second*
Condition (Additional)
• * Top or second can be selected by programme [990] System
1
Additional Information Area 08 - Bits 7-10.
The Default has been changed as follows:
10 min. 0
This programme has been replaced with a new one. Refer to page 73.
Description (Additional)
Chart for the Areas and Bits has been added. Refer to page 75.
Explanation for Area 08 and 09 has been added. Refer to page 75.
This programme has been replaced with a new one. Refer to page 80.
[016] is added to the values list as follows:
Programme
[016] DISA/TIE User Codes
Feature
of the sequence.
1
Default
All DISA/TIE user code numbers-
DISA/TIE user code=Blank;
COS number=8
Default
6
737
Programming Guide