Getting Started; Set The General Settings - JVC KD-MR1BTS Instruction Manual

Getting Started

Set the general settings

1
Press < > to turn on the power.
2
Press and hold <
3
Press <E>/<F> to select [
Settings).
4
Turn the volume knob to select an item (see the
following table), then press the knob.
5
Repeat step 4 until the desired item is selected/
activated or follow the instructions stated on
the selected item.
6
Press < >.
Beep
Turn the key touch tone on or off.
"ON" (Default), "OFF"
Tuner Region
N.America (Default): For North America, AM/FM
intervals: 10 kHz/200 kHz
S.America: For Central/South America, AM/FM
intervals: 10 kHz/50 kHz
Eur/Rus/Asia: For Europe, Russia and Asia, AM/FM
intervals: 9 kHz/50 kHz.
Japan: For Japan, AM/FM intervals: 9 kHz/100 kHz.
M.East: For Middle East, AM/FM intervals: 9 kHz/50
kHz.
Aust.: For Australia, AM/FM intervals: 9 kHz/50 kHz.
B5A-3196-30_KD-MR1BTS_K.indb 3
> to display the settings.
] (General
Display Setting
You can change the display design.
"Night" (Default), "Auto", "Day"
AUX Input
SiriusXM (Default): Set to [SiriusXM] when
connecting the SiriusXM® Satellite Radio Tuner.
AUX: Set to [AUX] when connecting the Portable
audio player.
Pre-out
Selects whether rear speakers or a subwoofer are
connected to the preout terminals on the rear of the
unit (through an external amplifier).
"Full Range", "Subwoofer" (Default)
Source Gain
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
"-3dB" – "0dB" (Default) – "3dB"
Global Input: "-18dB" – "0dB" (Default)
Int. Amplifier
Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
"ON" (Default), "OFF"
Voltage Gauge
Display the supplied voltage.
Factory Reset
Select [Audio], [System], or [SiriusXM] and then
select [Yes] to set all the settings to the initial default
settings.
3
English |
Continued on the next page...
2019/04/02 17:22