JVC KD-MR1BTS Instruction Manual page 17

Installation
Ñ Connecting wires to terminals
Fuse (20A)
Accessory 7
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Speaker impedance: 2-8 Ω
B5A-3196-30_KD-MR1BTS_K.indb 17
Black
VIDEO IN
Purple/Black
REVERSE
Reverse camera trigger
input
Light Blue/Yellow
REMOTE CONT
Remote control wire
Black
USB INPUT
Black
ANTENNA INPUT
FM/AM antenna input
Gray
FRONT LINE OUT
Black
REAR/SUB LINE OUT
Red
AUX OR SIRIUSXM
Black
SIRIUSXM OUTPUT
Black
SIRIUSXM INPUT
Blue/White (Power control wire)
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Camera input (Yellow)
Connect to vessel's reverse lamp harness when
using the optional rear view camera.
To marine remote control unit (optional
accessory)
USB terminal
USB maximum power supply current :
DC 5 V = 1 A
FM/AM antenna
Front output
(Left; White, Right; Red)
Rear output/Subwoofer output switchable
(Left; White, Right; Red)
AUX Input/SiriusXM Audio Input
(Left; White, Right; Red)
(AUX source/SiriusXM source switchable)
(P.3)
* 1
SiriusXM Audio Output
(Left; White, Right; Red)
*1 Connect when using SiriusXM source.
SiriusXM Connect Tuner connector
For more information on how to install
the SiriusXM Connect tuner, consult the
installation guide included with the tuner.
When using the optional power amplifier,
connect to its power control terminal.
(Max. 200mA, 12V)
Orange/White
(Dimmer control wire)
To light control switch
Ignition key switch
Red
(Ignition wire)
Black (Ground wire) ¤
(To a negative ground
point of the vessel)
Fuse box
Battery
17
English |
Continued on the next page...
2019/04/02 17:22