Specifications - Sony STR-DA2ES Marketing Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
(4 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
80 W + 80 W
1)
FRONT :100 W + 100 W
CENTER 1) : 100 W
1)
SURR : 100 W + 100 W
1)
SURR BACK : 100 W
1)
FRONT: 80 W + 80 W
1)
CENTER : 80 W
1)
SURR : 80 W + 80 W
1)
SURR BACK : 80 W
2)
100 W + 100 W
2)
90 W + 90 W
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
(4 ohms 1 kHz, THD 0.7 %)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
E
SP, CEL, CEK, KR
2)
1)
FRONT : 100 W + 100 W
1)
CENTER : 100 W
1)
SURR : 100 W + 100 W
1)
SURR BACK : 100 W
1)
FRONT : 90 W + 90 W
1)
CENTER : 90 W
SURR 1) : 90 W + 90 W
1)
SURR BACK : 90 W
FRONT 1) : 90 W + 90 W
1)
CENTER : 90 W
1)
SURR : 90 W + 90 W
1)
SURR BACK : 90 W
1)
FRONT : 80 W + 80 W
1)
CENTER : 80 W
1)
SURR : 80 W + 80 W
SURR BACK 1) : 80 W
Power requirements
240 V AC, 50 Hz
230 V AC, 50 Hz
continued
GB
69