Certificates - Samson 3430 Operating Instructions Manual

Type 3436 Transmitter Module for Temperature
Measuring span °C
Measuring limit °C
Standard ranges °C
Overload limit
Perm. pressure at sensor
Supply air
Output
Deviation from terminal-based
linearity
Hysteresis
Influence
Pressure at sensor
Ambient temperature
Type 3438 Transmitter Module, consisting of Temperature Transmitter TTH200-E1H with Type 6112-22
i/p Converter Module
Electric Temperature Transmitter TTH200-E1H
Input
Measuring ranges
Connection
Measuring current
Output
Current consumption
Maximum output current
Supply voltage
Use in safe area
Use in hazardous area
Max. load R
B
Explosion protection
EC-type examination
certificate
50
–40 to +200 or
150 to 300
–20 to +30
Without thermowell: PN 16
Supply air 1.4 ± 0.1 bar (20 ±1.5 psi)
0.6 % with terminal-based conformity
< 0.6 %/10 bar
< 0.6 %/°C
Pt 100 resistance thermometer (RTD)
–30 to 60 °C, 0 to 40 °C, 0 to 100 °C, 0 to 150 °C, 0 to 200 °C, 0 to 400 °C,
Four-wire circuit, resistance per wire < 50 ohm
4 to 20 mA, linear to temperature
Two-wire system: Power supply lines = Signal lines
U = 16.5 to 28 (25) V
S
The supply voltage U
II 2(1) G EEx [ia] ib IIC T6 acc. to ATEX
100
–40 to +300
0 to 100 50 to 100
350 °C
With thermowell PN 63 or PN 100
0.2...1.0 bar (3...15 psi)
< 0.25 %
Supply air: < 0.25 %/0.1 bar
< 0.25 %/10 bar
< 0.03 %/°C
other ranges on request
< 0.3 mA
< 3.5 mA
23.6 mA
U = 16 to 30 V
S DC
, see EC-type examination certificates
DC
determines the max. load: R
S
PTB 05 ATEX 2017 X
Technical data
150 200
0 to 200
< 0.15 %/10 bar
-
(U 16.5 V)
S
<
B
0.022 mA
EB 7030 EN
33