Checking The Components - Samsung OMN Series User Manual

Chapter 01
Preparations

Checking the Components

" Contact the vendor where you
purchased the product if any
components are missing.
" The appearance of the components
may differ from the images shown.
" A stand is not provided with the
product. To install a stand, you can
purchase one separately.
" Use either the back-side magnet or
the double-sided tape depending
on where you want to attach the
external ambient light sensor.
The warranty for adhesiveness of the
double-sided tape applies to first-
time-use only.
" The external ambient light sensor is
marked with the label on the sensor
cable.
Quick Setup Guide
(Not available in some locations)
Batteries (AAA x 2)
(Not available in some locations)
HOLDER-GUIDE x 2 / Screw (M3
Power IN rubber
(Supported model: OM55N-D)
Warranty card
Remote Control External ambient light sensor
x L6) x 4
(Supported model: OM55N-D)
(Supported model: OM55N-D)
Regulatory guide
External IR cable
(OM46N, OM55N x 1 / OM55N-D
Top cover
Power cord
x 2)
3