Sony ZS-D55 Operating Instructions Manual page 33

Tip
To record a track from
a number of different
CDs, 1TRACK is useful
(page 19).
1 Make connections.
2 Turn on this player
and the connected
component.
3 Do steps 1 through 3
on page 19.
4 Make the connected
component ready for
recording.
5 Start playing a CD on
this player.
Notes
• As long as "Cd"
appears in the display,
the optical digital
output jack is in
operation and the jack
lights even if the CD is
in stop mode.
• If you play a CD-ROM
that is not for audio
use, noise may be
heard.
Tip
You can record the
sound of the connected
component. Insert a
blank tape into the tape
compartment, and
press z/X then N
(page 11).
1
Remove the jack cover from the OPTICAL
DIGITAL OUT (CD) jack of this player and connect
the jack with the digital input jack of the MiniDisc
recorder or other component using the digital
connecting cable (not supplied) .
2
Turn on the power of this player and the connected
component.
3
Make the connected component ready for
recording.
4
Start playing a CD on this player.
Listening to TV, VCR and MiniDisc player/
recorder
to line
output jack
TV, VCR, MiniDisc
player/recorder,
etc.
Audio connecting cable
For MiniDisc recorder:
RK-G136 (1.5 m) (not supplied)
For TV, VCR:
RK-G129 (1.5 m) (not supplied)
1
Connect the LINE IN jack of this player with the
line output jack of the MiniDisc player or other
component using the audio connecting cable (not
supplied) .
2
Turn on the power of this player and the connected
component.
3
Press MD (LINE) and start playing sound on the
connected component.
The sound from the connected component is
output from the speakers.
Rear panel of
this player
to LINE IN jack
continued
Setting Up
33