Important Safety Warnings - Agilent Technologies G6012A User Information

1
Introduction

Important Safety Warnings

WA R N I N G
C A U T I O N
C A U T I O N
WA R N I N G
8
Safety cautions and warnings must be observed during all
phases of operation, service, and repair of Quiet Cover DS.
Failure to comply with these precautions violates safety
standards of design and Quiet Cover DS's intended use.
Agilent Technologies assumes no liability for the customer's
failure to comply with these requirements.
Never run the pump without also running Quiet Cover DS.
While running Quiet Cover DS:
• Do not block air flow to the fans.
• Do not set items on top of Quiet Cover DS.
• It is important that the Quiet Cover DS not recirculate hot air. Always
position the back end of the Quiet Cover DS where it can draw cool air.
Be sure to position Quiet Cover DS so that there is plenty of room to
allow access to panels and controls. See Table 3 on page 13 for
more information.
In the event of a temperature alarm malfunction or if the alarm has
been on for an extended period of time, Quiet Cover DS and the
pump may be dangerously hot. Check that the Quiet Cover DS and
pump are cool before you touch them.
Quiet Cover DS User Information