Sony SA-VA10 Operating Instructions Manual page 5

Dolby Pro Logic Surround sound
The use of a center speaker is a key factor in obtaining
a full surround effect when playing sources encoded
with the Dolby Pro Logic Surround sound system.
Center speakers in a movie theater make central
sounds, such as dialogue, clearer and create a unified
sound image.
Normally, you have to install a center speaker
separately, but this speaker system makes it easy to set
up a high-performance home theater system by
incorporating a high-quality center speaker system into
the front speakers.
Top view
Center channel
speakers
Front view
Center channel
speakers
Left speaker
Rear
speakers
How the center speaker works
The front left and right speakers are equipped with center
channel tweeters (see above) angled inwards at 30° to
reproduce high-frequency center channel sounds. Low-
frequency center channel sounds are mixed with the front
channel signals and reproduced through the front left and
right full range units. This design produces a high-quality
centralized sound image for the center channel which
exactly matches the quality of the front channel sound to
provide superior sound quality and a unified sound image
without a cumbersome external center speaker.
Dynamic Bass Roar (DBR) super woofer
system provides theater-like bass sound
To provide a theater-like experience complete with
dynamic bass sounds, this speaker system incorporates
the Super Acoustically-loaded Woofer (SAW) design
(see below) in the right front speaker to form a DBR
super woofer system.
What is the SAW design?
The SAW design features a centrally-positioned woofer
drive unit, two chamber construction, and a long duct.
Through precision control of the acoustics of the two
chambers, the unit can reproduce powerful ultra low
frequencies without muddiness.
Right speaker
In addition, we also included two super woofer modes
designed to bring the dynamic bass sounds found in
movie theaters (mode 1) and concert halls (mode 2) to
your living room.
Super woofer
Power turns on and off automatically
The speakers will turn on automatically when a sound
signal is input and turn off when you've finished
watching a program and the sound signal goes out. So
you don't have to bother using the power switch every
time you use the system.
Duct
Overview
Chamber
Drive unit
5