Muffler Replacement; Muffler Outlet Pipe Replacement; Cylinder Exhaust System Diagram - Ford 1949-50-51 F-Series Truck Shop Manual

20 Chapter I-General Engine Repair
fig. 32-8-Cylinder Exhaust System
6. MUFFLER, INLET PIPE, OUTLET PIPE,
AND CROSSOVER PIPE (8.CYLINDER ONLY)
The procedures given here cover the removal and
installation of each part in the exhaust system.
Figure 32 shows the 8-cylinder exhaust system. The
6-cylinder parcel delivery exhaust system shown in fig.
33 is typical of all 6-cylinder trucks.
a. Muffler Replacement.
Loosen the inlet and outlet pipe clamps. Remove the
outlet pipe. Remove the muffler from the inlet pipe.
To install, connect the muffler to the inlet pipe. Con-
nect the outlet pipe to the muffler and tighten both
clamps.
h. Muffler Outlet Pipe Replacement.
Loosen the muffler outlet pipe clamp and remove the
outlet pipe from the muffler.
To install, connect the outlet pipe to the muffler and
tighten the outlet pipe clamp.
fig. 33-6-Cylinder Exhaust System