Table of Contents
Advertisement
assistance. You can disable location services to plan a route
when GPS signals are not available. When location services are
disabled, the device enables a GPS simulator to calculate and
simulate routes.
1
Select
> Location.
2
Select the toggle switch to enable or disable location
services.
NOTE: For most uses, you should not change the Mode setting
from the default option of Device only. The device includes a
high-performance GPS antenna that provides the most accurate
location data while navigating.
Setting the Text Language
You can select the language for text in the device software.
1
Select
> Language & input > Language.
2
Select a language.
Adding Accounts
You can add accounts to your device to synchronize email,
appointments, and other data.
1
Select
> Accounts > Add Account.
2
Select an account type.
3
Follow the on-screen instructions.
Date and Time Settings
Select
> Date & Time.
Automatic date & time: Automatically sets the time based on
information from the connected network.
Set date: Sets the month, day, and year on your device.
Set time: Sets the time on your device.
Select time zone: Sets the time zone on your device.
Use 24-hour format: Enables or disables the 24-hour time
format.
Device Settings
Select
> About device.
System updates: Allows you to update map and device
software.
Status: Displays the system status and network information.
Legal Information: Allows you to view the end-user license
agreement (EULA) and software license information.
Regulatory information: Displays e-label regulatory and
compliance information.
Garmin device information: Displays hardware and software
version information.
Restoring Settings
You can restore a category of settings to the factory default
values.
1
Select
.
2
Select a settings category.
3
Select > Restore.
Device Information
Viewing E-label Regulatory and Compliance
Information
1
From the settings menu, swipe to the bottom of the menu.
2
Select About device > Regulatory information.
Device Information
Specifications
General
Operating temperature range
Storage temperature range
Input voltage
Current (max.)
Current (muted)
Current (standby mode)
Fuse
Bluetooth wireless range
ANT wireless range
Wireless frequencies/
protocols
On-board, Class D Amplifier
Output music power per
channel
Total output peak power
Output power per channel
Line output level (max.)
Aux input level (typical)
*The stereo may limit the output power to prevent the amplifier
from overheating, and to maintain the audio dynamics.
Tuner
Europe and
Australasia
FM radio
87.5 to 108 MHz
frequency range
FM frequency
50 kHz
step
AM radio
522 to 1620 kHz
frequency range
AM frequency
9 kHz
step
Device Maintenance
Garmin Support Center
Go to
support.garmin.com
product manuals, frequently asked questions, videos, and
customer support.
Map and Software Updates
For the best navigation experience, you should keep the maps
and software on your device up to date.
Map updates provide the newest available changes to roads and
locations in the maps used by your device. Keeping maps up to
date helps your device find recently added locations and
calculate more accurate routes. Map updates are large and may
take several hours to complete.
Software updates provide changes and improvements to the
device features and operation. Software updates are small and
take a few minutes to complete.
You can update your device using two methods.
• You can connect the device to a Wi‑Fi network to update
directly on the device (recommended). This option allows you
to update your device conveniently without connecting it to a
computer.
• You can load software updates onto a memory card using the
Garmin Express application (garmin.com/express).
From -10 to 60°C (from 14 to 140°F)
From -20 to 70°C (from -4 to 158°F)
From 10.8 to 16 Vdc
15 A
Less than 1 A
Less than 5 mA
15 A mini blade-type
Up to 10 m (30 ft.)
Up to 3 m (10 ft.)
Wi‑Fi 2.4 GHz @ +15 dBm nominal
Bluetooth 2.4 GHz @ +10 dBm nominal
ANT 2.4 GHz @ +4 dBm nominal
4 x 70 W max. 2 ohm
280 W max.
4 x 43 W RMS at 14.4 Vdc input,
2 ohm, 10% THD*
4 x 26 W RMS at 14.4 Vdc input,
4 ohm, 10% THD*
5.5 V (peak to peak)
1 V RMS
USA
Japan
87.5 to
76 to 95 MHz
107.9 MHz
200 kHz
50 kHz
530 to
522 to
1710 kHz
1620 kHz
10 kHz
9 kHz
for help and information, such as
25
Advertisement
Table of Contents
