Fujitsu ASWX18FAT Operating Manual page 23

Fig. 6 Remote Controller
(6-1) MODE button
(6-2) SET TEMP. button (
(6-3) POWERFUL button
(6-4) SLEEP button
(6-5) TIMER MODE button
(6-6) CLOCK ADJUST button
Fig 7 Remote Controller Display
(7-1) Temperature SET Display
(7-2) Operating Mode Display
(7-3) SLEEP Display
To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in
actual operation, however, the display will only show those indicators appropriate to the current operation.
/ )
(6-7) Signal Transmitter
Remote Controller Display (Fig. 7)
(6-8) FAN button
(6-9) START/STOP button
(6-10) SET button (Vertical)
(6-11) SET button (Horizontal)
(6-12) SWING button
(6-13) RESET button
(6-14) TIMER SET ( /
(6-15) TEST RUN button
• This button is used when installing the
conditioner, and should not be used
under normal conditions, as it will cause
the air conditioner's thermostat function
to operate incorrectly.
• If this button is pressed during normal
operation, the unit will switch to test
operation mode, and the Indoor Unit's
OPERATION Indicator Lamp and TIMER
Indicator Lamp will begin to fl ash
simultaneously.
• To stop the test operation mode, press
the START/STOP button to stop the air
conditioner.
(7-4) Transmit Indicator
(7-5) Fan Speed Display
(7-6) SWING Display
(7-7) Timer Mode Display
(7-8) Clock Display
) button
En-4