Belt Conveyors; Screw Conveyors - Siemens Milltronics Millpulse 600 Instruction Manual

Belt Conveyors

Screw Conveyors

idler end
Milltronics
Millpulse 600
clearance and
mounting hole,
Dimensions
See ,
page 9
Install a non-ferrous window for screw conveyors with troughing over 3 mm (0.125") thick
or for high temperature applications. The dimensions shown for the plate, window, and
bracket are the minimum recommended. Use series 300 stainless steel, brass, or
aluminum. Milltronics Millpulse 600 must not touch the plate if temperatures are in
excess of 60 °C (140 °F).
7ML19985DG02 Milltronics MillPulse 600 – INSTRUCTION MANUAL
ferrous blocks or
spoked wheel
Milltronics Milltronics
Millpulse Millpulse
600
600
Window Detail
bracket
window
plate
Milltronics Millpulse 600
mounting
Milltronics Millpulse 600
bracket
with supplied flange and
conveyor troughing
locknut
Page 11