Sony CDX-GT410U Operating Instructions

CDX-GT410U
Location of controls and basic operations
Main unit
1 2 3 4 5 6 7 8
OFF
PUSH SELECT
EQ3 SOURCE
SEEK SEEK
PTY MODE
DIM GP/ALBM REP SHUF PAUSE
DSPL 1 2 3 4 5 6 AF/TA AUX
CDX-GT410U
9 q; qa qs qd qfqg qh qj qk
Card remote commander Before using the card remote commander for the
fi rst time, remove the insulation fi lm.
RM-X151
wa
1
OFF ATT
ws
4
SOURCE SEL MODE
qd
ql
+
 OFF button
wd
To power off; stop the source.
–
 EQ3 (equalizer) button
qf wf
DSPL SCRL
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
1 2 3
wg GRAVITY, CUSTOM or OFF).
To adjust the equalizer curve, see
4 5 6
"Customizing the equalizer curve" on the
reverse side of this sheet.
+
w;
VOL  Volume control dial/select button
–
To adjust volume (rotate); select setup items
(press and rotate).
 SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /USB/AUX).
© 2006 Sony Corporation
 Disc slot Notes
• Before operating the unit for the fi rst time, or
Insert the disc (label side up), and playback
after replacing the car battery or changing the
starts automatically. You can play CD-DA
connections, you must reset the unit.
(also containing CD TEXT), CD-R/CD-RW
• Pressing the RESET button will erase the clock
(MP3/WMA/AAC fi les also containing
setting and some stored contents.
Multi Session) and ATRAC CD (ATRAC3
 Number buttons
and ATRAC3plus format).
CD/MD* 1 /USB* 2 :
 Display window /: GP*
5 /ALBM* 6 –/+
 USB terminal To skip groups/albums (press); skip
groups/albums continuously (press and
To connect to the USB device.
hold)* 7 .
  (eject) button
: REP
: SHUF
To eject the disc.
: PAUSE*
8
 PTY (Program Type) button
To pause playback. To cancel, press
To select PTY in RDS. After pressing
again.
, press  –/+ to search for a
Radio:
station.
To receive stored stations (press); store

(front panel release) button stations (press and hold).
 SEEK –/+ buttons  AF/TA button
CD/MD* 1 /USB* 2 :
AF (Alternative Frequencies)/TA (Traffi c
To skip tracks (press); skip tracks
Announcement), TP (Traffi c Programme):
Each time you press , the item
continuously (press, then press again within
about 1 second and hold); reverse/fast-
changes as follows:
forward a track (press and hold).
AF-ON  TA-ON  AF, TA-ON 
Radio:
AF, TA-OFF
To tune in stations automatically (press);
 AUX input jack
fi nd a station manually (press and hold).
 Receptor for the card remote To connect a portable audio device.
commander
The following buttons on the card remote
 MODE button commander have also different buttons/functions
from the unit.
To select the radio band (FM/MW/LW);
  () /  () buttons
3 4
select the unit* ; select the play mode* .
To control CD/radio/MD/USB, the same as
 DSPL (display)/DIM (dimmer) button
 –/+ on the unit.
To change display items (press); change the
 VOL (volume) +/– button
display brightness (press and hold).
To adjust volume.
 RESET button (located behind the front
 ATT (attenuate) button
panel)
Detach the front panel and press the RESET To attenuate the sound. To cancel, press
again.
button with a pointed object, such as a ball-
point pen.  SEL (select) button
The same as the select button on the unit.
Detaching the front panel
You can detach the front panel of this unit to
  (+) /  (–) buttons
prevent theft.
To control CD, the same as / (GP/
ALBM –/+) on the unit.
1 Press .
 SCRL (scroll) button
The unit is turned off.
To scroll the display item.
2
Press , then pull it off towards you.
 Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When a USB device is connected.
*3 When a CD/MD changer is connected.
*4 When an ATRAC Audio Device is connected.
*5 When an ATRAC CD is played.
*6 When an MP3/WMA/AAC is played.
Attaching the front panel
*7 If the changer/USB device is connected, the
Engage part  of the front panel with part  of
operation is different.
the unit, as illustrated, and push the left side into
*8 When playing back on this unit.
position until it clicks.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears,
it cannot be operated with the card remote
commander unless  on the unit is
pressed, or a disc is inserted to activate the unit
fi rst.
Warning if your car's ignition has no
A
ACC position
Be sure to set the Auto Off function. The unit
B
will shut off completely and automatically in
the set time after the unit is turned off, which
prevents battery drain. If you do not set the
Auto Off function, press and hold 
until the display disappears each time you
turn the ignition off.
Display items for CD / Repeat and shuffl e play / Playback USB devices /
Display items for USB / Listening to music on a Mass Storage Class type audio
device / Listening to music on "Walkman" (ATRAC Audio Device) / Adjusting the
sound characteristics / Customizing the equalizer curve / Adjusting setup items
SET UP RADIO
Setting the clock Storing stations automatically
The clock uses a 24-hour digital indication. — BTM
The unit selects strong signal stations and stores
1
Press and hold the select button.
them. You can store up to 6 stations per band
The setup display appears.
(FM1, FM2, FM3, MW, or LW).
2
Press the select button repeatedly
until "CLOCK-ADJ" appears.
Caution
3 Press  +. When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
The hour indication fl ashes.
4
Rotate the volume control dial to set 1 Press  repeatedly until
the hour and minute.
"TUNER" appears.
To move the digital indication, press 
To change the band, press 
–/+.
repeatedly. You can select from FM1, FM2,
5 FM3, MW or LW.
Press the select button.
The setup is complete and the clock starts. 2
Press and hold the select button.
The setup display appears.
Tip
3
You can set the clock automatically with the RDS Press the select button repeatedly
feature. For details, see "Adjusting setup items" on the until "BTM" appears.
reverse side of the sheet, and set to "CT-ON" (Clock
4 Press  +.
Time).
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.