Remote Commander - Sony VPL-PX32 Operating Instructions Manual

6 OUTPUT connectors
MONITOR (HD D-sub 15-pin, female): Connects
to the video input connector on the monitor.
Outputs signals from the selected channel in the
INPUT A (RGB or 5BNC) or INPUT B (RGB)
connector. This connector does not output any
signals from the DIGITAL RGB connector.
AUDIO (phono type): Connects to external active
speakers.
The volume of the speakers can be controlled by the
VOLUME +/– keys on the Remote Commander or
the VOL +/– keys on the control panel.

Remote Commander

The keys which have the same names as on the
control panel function identically.
wg
wf
COMMAND
OFF ON
wd
PJ NETWORK
ws
wa
LENS
w;
APA
ql
MENU/
TAB
qk
qj
qh
qg
D ZOOM
1
PROJECTOR
qd,qf
Note
There may be no LENS key in your Remote Commander.
Moreover, the position of the HELP key and the FREEZE
key on your Remote Commander may differ.
Notes on laser beam
• Do not look into the laser transmitter.
• Do not aim the laser at people.
1 I / 1 key
2 MUTING keys
Cut off the picture and sound.
PIC: Cuts off the picture. Press again to restore the
picture.
AUDIO: Cuts off the sound from speakers and
AUDIO jack. Press again or press the VOLUME
+ key to restore the sound.
wh
1
PIC
2
MUTING
AUDIO INPUT
3
D KEYSTONE
4
VOLUME
5
HELP
6
LASER
FREEZE
7
8
9
R q;
ENTER
CLICK
RESET/
ESCAPE
qa
3
qs
2
FUNCTION
RM-PJM15
Location and Function of Controls
3 INPUT key
4 D KEYSTONE key
Corrects the trapezoidal distortion caused by the
projection angle. Use the arrow keys (M/m/</,) to
display the image as a rectangle.
5 HELP key
If you need help information during an operation,
press this key to display help messages.
6 FREEZE key
This key does not work in the unit.
7 Laser transmitter
8 Joy stick
Functions as a mouse of a computer connected to the
unit.
9 Arrow keys (M/m/</,)
0 R CLICK key
Functions as a right button on a mouse of a computer
connected to the unit.
qa ENTER key
qs FUNCTION 1/2/3 keys
This key does not work in the unit.
qd Strap holder
Attaches the supplied strap.
qf CONTROL S OUT jack (stereo minijack)
Connects to the CONTROL S IN jack on the projector
with the connecting cable (not supplied) when using
the Remote Commander as a wired one. In this case,
you do not need to install the batteries since the power
is supplied via the CONTROL S IN jack on the
projector.
qg RESET/ESCAPE key
Functions as a RESET key.
qh D ZOOM +/– key
Enlarges the image at a desired location on the screen.
+: Pressing the + key once displays the icon. This
icon indicates the point you want to enlarge. Use
an arrow key (M/m/</,) to move the icon to
the point to be enlarged. Press the + key
repeatedly until the image is enlarged to your
requirements.
–: Pressing the – key reduces an image that has been
enlarged with the D ZOOM + key.
qj L CLICK key
Functions as a left button on a mouse of a computer
connected to the unit.
13
(GB)