Starting A Slide Show From The Selected Index Picture; Displaying A Picture File On The Full Screen; Executing The Slide Show Promptly - Sony VPL-CX76 Operating Instructions Manual

8
Select each item, then press the
ENTER key.
9
Set each item, then press the ENTER
key.
10
Select "Start", then press the ENTER
key.
To execute the slide show
When "Advan. Slds." in the slide show
setting is set to "Auto", the slides change
automatically. When a movie file is selected,
the movie plays back automatically, and
after playback the next slide is displayed
automatically. When you want to end the
slide show, press the
When it is set to "Manual", press the
following keys for the slide show.
, : to display the next slide
< : to display the previous slide
: to end the slide show
When "Advan. Slds." is set to "Manual",
the movie is not played back and the first
picture is displayed for a movie file. By
,
pressing the key the next slide is
displayed. To play back the movie, see
"Playing Back a Movie File" on page 17.
To return to Memory Stick Home
before executing the slide show
Select "Close" to return to Memory Stick
Home before executing the slide show in
Step 10 of "Sliding a Picture File — Picture
Viewer" (see page 14)
Starting a Slide Show from the
Selected Index Picture
You can run a slide show by selecting a
thumbnail in the normal or thumbnail
display mode.
1
Press the M, m, < or , key to select
the picture file from which you want to
start the slide show, and press the
ENTER key.
16
Sliding a Picture File — Picture Viewer
or ENTER key.
2
Press the m or M key to select "Slide
Show" in the picture setting menu, and
press the ENTER key.
Displaying a Picture File on
the Full Screen
1
Select a picture file in the thumbnail
display, then press the ENTER key.
2
Select "Full Screen", then press the
ENTER key.
The selected picture file is enlarged on
the full screen.
To execute the slide show with the
picture on the full screen
Press the following keys.
, : to display slides forward (The slide
show ends at the last picture file.)
< : to display slides backward (The slide
show ends at the first picture file.)
: to return to Memory Stick Home
Executing the Slide Show
Promptly
As the settings are memorized even if you
change the input after the setting of steps 1
to 9 of "Sliding a Picture File — Picture
Viewer", press the
Commander just as you start the
presentation. The input is changed to
"Memory Stick". Press the
and the slide show starts promptly. To end
the slide show, press the
key when "Advan. Slds." is set to "Auto", or
key on the Remote
key again
or ENTER