CAUTIONS IN SERVICING
Initi i in BD p
BD player initiali ation should be performed when the com, peripheral parts of com, and MAIN P.W.B. were replaced.
1. Turn on this model s power. "NO DISC" is displayed on the FL tube.
2. P ress the this model s 2 and DISC LAYER buttons simultaneously. "INITIALI IN " is displayed on the FL tube.
3. T he display on the FL tube switches to "INITIALI ED", the "NO DISC" display reappears and initiali ation is
completed.
Note •If step 3 does not work, start over from step 1.
• A ll user settings will be lost and this factory setting will be recovered after the set is initiali ed.
So make sure to note down your setting beforehand for restoring after the initiali ation.
ON STANDBY
Ser ice too s
f
Measuring Disc:
z Refer to "MEASURIN MET OD AND WAVEFORMS".
When you repair the BD MEC A UNIT, you can use the following I .
Please order to marant Official Service Distributor in your region if necessary.
Do not supply it
:
Do not supply it
:
Part No. :6120 000300AS
z Refer to " OW TO REPLACE T E MEC A UNIT (TRAVERSE)".
er
DISC LAYER
CD TCD-784
DVD VT 02 or TDV- 20A
BD ABD- 20 or BLX-108
2-Dimensional Bar Code Reader (DS6708 made by Symbol Co. etc.)
232C (TTL) USB conversion jig (Model: DUT-0663 by
:
4P RE-P CONN CORD (1000mm): : 1 Set
7
2
: 1 Set
eeeTech):
: 1 Set