About The Preset Memory No - Sony VPL-CX21 Operating Instructions Manual

About the Preset Memory No.

This projector has 40 types of preset data for
input signals (the preset memory). When a
preset signal is input, the projector
automatically detects the signal type and
recalls the data for the signal from the preset
memory to adjust it to an optimum picture.
The memory number and signal type of that
signal are displayed on the Information
menu (See page 29). You can also adjust the
preset data through the Signal menu.
This projector has 20 types of user memories
for Input-A into which you can save the
setting of the adjusted data for an unpressed
input signal.
When an unpressed signal is input for the
first time, a memory number is displayed as
0. When you adjust the data of the signal
using the menu, it will be registered in
Signal
the projector. If more than 20 user memory
items are registered, the newest memory
always overwrites the oldest one.
See the chart on page 41 to find if the signal
is registered in the preset memory.
Since the data for the following signals is
recalled from the preset memory, you can
use these preset data items by adjusting "H
Size." Make finer adjustments by adjusting
"Shift."
Signal Memory No. SIZE
Super Mac-2 37
SGI-1 37
Macintosh 19" 39
Macintosh 21" 41
Sony News 47
PC-9821 47
1280 × 1024
WS Sunmicro 48
Note
When the aspect ratio of input signal is other
than 4:3, a part of the screen is displayed in
black.
1312
1320
1328
1456
1708
1600
1664
23
The Signal Menu