Security Lock - Sony VPL-CS7 Operating Instructions Manual

Security Lock

The projector is equipped with a security
lock function. When you turn the power of
the projector on, you are required to input
the previously set password. If you do not
input the correct password, you will not be
able to project the picture.
Note
You will not be able to use the projector if you
forget your password and the password
administrator is not available. Be please aware
that using the security lock can prevent valid
usage in such cases.
To use the security lock
1
Press the MENU key and then, in the
INSTALL SETTING menu, turn on
the " Security Lock
2
Enter the password.
Use the MENU, v/V/b/B, and ENTER
keys to enter the four-digit password.
(The default setting is "ENTER,
ENTER, ENTER, ENTER." Input
"ENTER" four times when you use the
projector for the first time.)
Enter password key.
Password required for power-on.
Use:
Next, the screen for entering a new
password is displayed. (Enter the current
password at this screen if you want to
keep it.)
Enter new password key.
Power-on cannot be performed
without the password.
Use:
24
Security Lock
" setting.
Cancel: Other key
Cancel: Other key
3
Enter the password again to confirm.
Re-enter new password key.
Be sure to remember this password.
Use:
The security lock is completed when the
following message appears.
INSTALL SETTING
T i l t . . .
V Key s t o n e :
I m ag e F l i p :
B a ck g ro u n d :
L a m p M o d e :
High Altitude Mode: O f f
S e c u r i t y L o ck :
S e c u r i t y L o ck e n a bl e d !
If the menu screen displays an "Invalid
Password!" message, do over again from
step 1.
INSTALL SETTING
T i l t . . .
V Key s t o n e :
I m ag e F l i p :
B a ck g ro u n d :
L a m p M o d e :
High Altitude Mode: O f f
S e c u r i t y L o ck :
I nva l i d Pa s swo rd !
4
Turn the main power off and
disconnect the AC power cord.
The security lock is set to on, then it
becomes effective. The screen for
entering the password is displayed when
the power is turned on the next time.
Security certification
When the screen for entering the password is
displayed, enter the password that was set. If
you fail to enter the correct password after
three tries, the projector cannot be used. In
this case, press the I / 1 key to turn off the
power.
Cancel: Other key
Input A
X
Au t o . . .
O f f
B l u e
S t a n d a rd
O n
Input A
X
Au t o . . .
O f f
B l u e
S t a n d a rd
O f f