Sony VPL-CS7 Operating Instructions Manual page 20

4
Press the INPUT key to select the
input source.
Each time you press the key, the input
signal switches as follows:
t
INPUT A Component
(VPL-ES2 only)
To input from
Computer connected to the
INPUT A connector
Equipment connected to the
component connector
Video equipment connected to
the VIDEO input connector
Video equipment connected to
the S VIDEO input connector
Smart APA (Auto Pixel Alignment)
adjusts the picture of the connected
equipment so that it is projected clearly.
5
Switch the equipment to be connected
to output to the projector.
Depending on the type of your
computer, for example a notebook, or an
all-in-one LCD type, you may have to
switch the computer to output to the
projector by pressing certain keys
(e.g.,
/
,
LCD
VGA
changing your computer's settings.
F7
or
and
Fn
Fx:"x" indicate an optional numerical
value. The Fx key varies depending
on a computer's makers.
20
Projecting
t t
VIDEO S VIDEO
Press INPUT
to display
INPUT A
Component
(VPL-ES2
only)
VIDEO
S VIDEO
, etc.), or by
/
Fx
Notes
•If "Auto Input Search" is set to "On," the
projector searches for the signals from
the connected equipment and displays
the input channel where the input signals
are found.
For details, see "Auto Input Search"
in the SET SETTING menu on page 33.
•The Smart APA is effective for the input
signal from a computer only.
6
Adjust the position of the picture.
To adjust using the Remote
Commander
To adjust the position of the picture,
using the Remote Commander, press the
D KEYSTONE key on the Remote
Commander to display the Tilt menu and
adjust the tilt using the v/V/b/B keys.
To adjust using the Control Panel
Press f on F of the TILT key to adjust
the tilt of the projector.
to lower the
projector
TILT adjustment key
Powered tilt adjuster
Notes
• When you adjust the powered tilt
adjuster with the TILT key, the V
keystone adjustment is performed at the
same time. If you do not want to perform
the automatic keystone adjustment, set
the V Keystone menu to "Manual." (See
page 36.)
• If you set the "V Keystone" adjustment
to "Auto," the "V Keystone" correction
is automatically adjusted. However, it
may not be perfectly adjusted depending
to raise the
projector
TILT