KP-41S5/41S5B/41S5G/
41S5K/41S5R/41S5U
RM-862
2-10. CHASSIS BLOCK REMOVAL
(1) H1, H2 BOARDS AND AND RESISTOR
REMOVAL
4 Four connectors
1 Two screws
(+ BVTP 4X16)
2 Control panel assembly
(2) MAIN BRACKET REMOVAL
3 Set the main
bracket.
2 Pull the main bracket, and
remove each connectors on main bracket.
Pay particular attention to the wires of each Printed circuit
boards when puling out the main bracket.
6 Resister (High voltage)
5 Screw
(+ BVTP 4X6)
3 Three connectors
1 Two screws
(Hexagon head)
(3) CHASSIS BLOCK REMOVAL
2 Pull out the
Pull out the chassis block by gripping the handles as shown
in the diagram.
At this time, pay particular attention to the components
removed in (1).
– 18 –
1 Six screws
(Hexagon head)
chassis block.