Table of Contents
Advertisement
Connecting
a DVD Player (Upper
illustration)
Using an AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO IN on the
projection
TV to AUDIO and S VIDEO OUT
on the DVD Player (White-AUDIO
Left, Red-
AUDIO
mght).
Connecting
a DVD
Player
with
component
video
output
connectors
(Lower
illustration)
1
Using an AUDIO cable, connect AUDIO of
LINE OUT on the DVD Player to AUDIO of
VIDEO 4 IN on the projection
TV (WNte-
AUDIO Left, Red-AUDIO
Right).
2 Using three yellow VIDEO cables, connect
Y, Pl_, and PR of COMPONENT
VIDEO
OUT on the DVD Player to Y, PE_. a nd PR of
VIDEO 4 IN on the projection
TV.
Notes:
• Since fhe high quality pictures
on a DVD
disc contain a lot of information,
picture
noise may appear. In [hks case, adjust "Noise
Reduction"
ill the
Video
menu.
(see
"Noise
Reduction"
on page 26)
• Some DVD Player termh'mls may be labeled
differently.
If so, connect as follows:
Connect Y (green) to Y,
Connect Pn (b_ue) to C,, Cb or B Y,
Connect Pl_ (red} to C_, Cr or R Y.
• This prNectlon
TV does not support
progressive
scan DVD players output,
Please
use the interlaced
output,
Disconnect aft power sources before making any connections.
DV[$
_VD
Player
directly to the projection TV,
Conrle_ing the DVD Player
through
other video
equipment will tause
unwanted picture noi_e.
Advertisement
Table of Contents
