Small Belt Removal And Replacement Instructions - Bissell 9200 SERIES User Manual

S
mall Belt Removal and Replacement Instructions
Occasional replacement of one or both belts may
become necessary. If that is needed, please
follow the instructions below.
1.
Turn off the machine, and unplug it from the outlet.
2.
Remove both the 2-in-1 water tank and the
formula tank. Set aside.
3.
Unscrew the nozzle and remove it. Set aside.
4.
Turn the machine on its side.
IMPORTANT: Make sure that the cord side is down.
5.
Remove the clear end cap by unscrewing the 2
black screws. Take care not to drop the screws
into the unit.
6.
Remove 1 silver screw.
7.
Remove pivot arm by gently lifting up.
8.
Remove small brush belt.
9.
Replace small brush belt, and reverse steps above.
w w w . b i s s e l l . c o m
ug310-5880_9200E_406.indd 17 ug310-5880_9200E_406.indd 17
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
1 2
3 3a
4 5
6 7
8 9
17
6/9/06 4:25:45 PM 6/9/06 4:25:45 PM