Panasonic SC-HTB900 Operating Instructions Manual page 7

Remote control
1
2
INPUT
3
SETUP
4

1 [Í] Switch the main unit from on to standby
or vice versa ( 18)
2 [INPUT] Select the input source ( 18)
3 [SETUP] Select the setup menu ( 22)
4 [SOUND] Select the sound menu ( 21)
5 [ -PAIRING]
≥ Select the Bluetooth
( 18)
≥ Bluetooth pairing ( 20)
®
≥ Disconnecting a Bluetooth
6 [i VOL j] Adjust the volume of this system
( 18)
7 [MUTE] Mute the sound ( 18)
8 [4][OK][3] Select and confirm the option
5
6
SOUND
7
8

OK
device as the source
®
device ( 20)
®
∫ Before using for the first time
Remove the insulation sheet A.
≥ Dispose of the insulation sheet responsibly after
removing it.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)


≥ Set the button-type battery with its (i) mark
facing upward.
∫ About remote control signal sensor
The remote control signal sensor is located on
the main unit.
≥ Use the remote control within the correct
operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 30 left and right
o
7
TQBM0479