Using Av Preset - Sony KL-37W1 Operating Instructions Manual

Using AV Preset

Using this function you can preset the desired input source (e.g.
1, RGB signal) to the respective AV input (AV 1
way a connected VTR will automatically switch to the RGB signal.
1 Select the symbol for "Preset" with + or – and press OK.
2 Select first "Installation", then "AV Preset" with + or – and press
OK.
The AV PRESET menu appears (See Fig. 47).
3 Select the desired AV input with + or – and press OK.
4 Select the desired source with + or – and press OK.
For the respective AV inputs you have the following possibilities:
AV1 RGB or AV
AV2 YC2 or AV
5 If you want to name the AV input select "Label" using + or –
and press OK. Select a letter or a number with + or – and
press OK. The next element will be highlighted. Select other
characters in the same way. If you want to leave an element blank,
select - and press OK.
After having selected all the characters, press OK repeatedly until
the cursor appears by the next AV input at the left margin.
6 Repeat steps 3 to 6 for the other AV inputs.
Checking and selecting the input and output sources
using the menu
You can display the menu to see which input sources are selected
for the TV screen and PAP screen, and which output source is
selected. You can also select them on the menu display.
1 Select the symbol for "Video Connection" with + or – and
press OK. The VIDEO CONNECTION menu appears. (See Fig.
48)
You can see which source is selected for the TV and PAP input,
and for the output. If you want to select the input and output on this
menu, go on to the next step.
2 Select TV Screen (input source for the TV screen), PAP (input
source for the PAP screen), or output (output source) with + or
– and press OK. One of the source items changes colour.
3 Select the desired source with + or –.
For details about each source, see the table on page 24.
4 Press OK.
The selected source is confirmed, and the cursor appears.
5 Repeat steps 2 to 4 to select the source for other inputs or outputs.
). In this
AV3 YC3 or AV
AV4 YC4 or AV
AV PRESET
AV-INPUT SOURCE LABEL
AV1 RGB RGB
AV2 Y/C YC2
AV3 Y/C YC2
AV4 Y/C YC2
Select and press OK
Fig.47
VIDEO CONNECTION
TV screen [ TV - - - - - ]
PAP [ AV2 VHS 2 ]
Output [ TV - - - - - ]
TV
TV
VHS 2
Select and press OK
Fig. 48
25
GB