Connecting I.link Compatible Devices - Sony KDP 57XBR2 Operating Instructions Manual

Setting Up the Projection TV

Connecting i.LINK Compatible Devices

Using i.LINK Cables
30
This projection TV is equipped with i.LINK, which provides a secure
digital interface to other digital home entertainment devices,
including digital cable set-top boxes. i.LINK allows for the secure
transfer of copyright-protected high-definition content between these
devices and your digital television.
At the time this TV went to market, the Sony digital cable set-top box (DHG-
M55CV) is the only i.LINK device that is verified to be compatible with this TV.
Some early versions of the Sony digital cable set-top box (DHG-M55CV) may
not support an i.LINK digital connection to your TV. If you have difficulty with
the connection between your Sony digital cable set-top box (DHG-M55CV) and
your TV, contact Customer Information Service Center at 1-800-222-
SONY(7669). In most cases you can continue to use your set-top box with your
TV, using and analog audio/video connection (as shown on page 31), instead
of the i.LINK digital connection (also shown on page 31).
For more information about i.LINK, see "About i.LINK" on page 73.
This projection TV has two 4-pin S200 i.LINK terminals. You can use
any of the following i.LINK cables with the projection TV:
4-pin i.LINK cable
Sony Model Number
VMC-IL4415
VMC-IL4435
Do not use cables other than the types listed above.
Length
1.5 meters
3.5 meters