Setting Up the Projection TV
Connecting a Camcorder
28
For easy connection of the camcorder, the projection TV has front
Audio and Video inputs (shown below). If you prefer, you can
connect the camcorder to the projection TV's rear Audio and Video
IN jacks.
Using A/V cables, connect the camcorder's Audio and Video
OUT jacks to the projection TV's Audio and Video IN jacks.
Inside the front panel
of the projection TV
If you have a mono camcorder, connect its audio output to the
projection TV's AUDIO L jack.
If the camcorder you are connecting has an S VIDEO jack, you can use an
S VIDEO cable for improved picture quality (compared to a combination
audio/video cable). Because S VIDEO cables carry only the video signal, you
will also need audio cables for sound.
Push to open
Camcorder