Using Antenna In Wega Gate; Using External Inputs In Wega Gate; Using Settings In Wega Gate - Sony Grand WEGA KDF-E60A20 Operating Instructions Manual

Using Antenna in WEGA GATE

Using External Inputs in WEGA GATE

Using Settings in WEGA GATE

The Antenna feature takes you to the most recently viewed channel on the
antenna input. When tuned to the channel, the Program Banner and Channel
number will be displayed.
Select Antenna from the WEGA GATE control panel and press
Full Focus
Sd Film Festivals Growth
0:29 Remaining Unrated
✍
If you have not completed the initial channel setup (see page 64) both
Cable and Antenna will tune to the lowest channel number. To run Auto
Program see page 64.
The External Inputs feature lets you view from a selected external input
connected to your TV. You can assign a label or skip over unused inputs by
selecting Edit Video Labels. Input label assignment can also be done by
going to Setup settings and select Label Video Inputs (see page 70).
1 Select External Inputs from the WEGA GATE control panel and press
.
The External Inputs list appears. Make your selection.
2 Press M/m to highlight the desired external input and press
External Inputs
Exit
Video 1 VHS
Video 2
Video 3
Video 4
Video 5
Video 6
Edit Video Labels
The Settings feature lets you enter to the menu screen where most of
advanced settings and adjustments are performed (see page 56).
Introducing WEGA GATE
15.1
KPBS-HD
720p 16:9
6:29PM
.
.
55