Help Function Commands - HP 2920 Series Multicast And Routing Manual

Help function commands

Syntax:
show igmp delayed-flush
Shows switch-wide IGMP delayed flush value.
Output:
IGMP Delayed Group Flush Timer: Disabled
Syntax:
show igmp filter-unknown-mcast
Shows switch-wide IGMP filter unknown multicast value.
Output:
IGMP Filter Unknown Multicast: Disabled
IGMP Filter Unknown Multicast Status: Disabled
Syntax:
show ip igmp
Usage:
show ip igmp [config|group IP-ADDR|groups vlan
<VLAN-ID>|statistics|VLAN-
Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are
disabled displays the global IGMP status.
When followed by the config keyword, shows IGMP global configuration
information.
When followed by statistics keyword shows igmp statistical information.
VLAN-ID can be used to get operational, statistical, and configuration information
for a particular VLAN (if VLAN support is enabled).
The group keyword can be used to show a list of ports where a particular multicast
group is registered.
The group keyword can be used to show VLAN-ID, group address, uptime,
expiration time, last reporter and hardware filter type information for each group.
When followed by VLAN keyword and VLAN-ID, it displays the VLAN group
address, uptime, expiration time, last reporter and multicast filter type for groups
that belong to that VLAN-ID.
Output:
IGMP Service Protocol Info
Total VLANs with IGMP enabled
Current count of multicast groups joined : 0
IGMP Filter Unknown Multicast: Disabled
IGMP Filter Unknown Multicast Status: Disabled
VLAN ID
VLAN Name : DEFAULT_VLAN
IGMP version : 2
IGMP is not enabled
32 Multimedia Traffic Control with IP Multicast (IGMP) v2 NG
: 1
: 0