Table of Contents
Advertisement
1.5 Software Supplied with the Enterprise Manager 2100 Systems
This reduces the consumption of wireless bandwidth and enables all AIVs in a fleet to
connect to one central point. You can monitor all AIVs from a single application.
Low maintenance
l
The Enterprise Manager 2100 functions as an appliance, not a server. It runs reliably
with little human intervention and minimal maintenance by IT staff. It is dedicated
only to the task of robot fleet management and is unaffected by other services. If some-
thing happens to the appliance, you can replace it, recreate the configuration on the
replacement appliance and the replacement operates identically.
You can optionally configure an additional (redundant) Secondary appliance for faster recov-
ery if the Primary appliance fails for any reason. See Add a Secondary Appliance for AutoSync
on page 54.
1.5 Software Supplied with the Enterprise Manager 2100
Systems
Your Enterprise Manager 2100 shipment includes a USB drive containing software and doc-
umentation. Before you install the hardware, install the software on a client Windows PC so
that you have access to the product documentation and Release Notes.
SetNetGo Operating System 4.9.x
SetNetGo runs on each AIV and Enterprise Manager appliance. It is the host operating system
(OS) in which fleet AIV software applications (ARAM and ARAMCentral) run.
You can use a Web browser to connect directly to SetNetGo on any AIV or Enterprise Manager
2100. This direct connection enables you to do configuration tasks through SetNetGo without
using the MobilePlanner user interface, which requires a license.
You use SetNetGo to configure the Ethernet settings for the platform, upgrading software, and
performing systems diagnostics, such as retrieving log files. You can access SetNetGo when
connected via the maintenance and management Ethernet ports, or via wireless Ethernet if
enabled.
There are several ways to access SetNetGo:
A direct Ethernet connection (Cat-V cable) between your PC client and the dedicated IP
l
address of the maintenance Ethernet port on the device (Enterprise Manager 2100 or
AIV.)
A Web browser over the network, using the SetNetGo Web user interface. After you con-
l
figure the network, you access the interface through the assigned IP address of the
device on which SetNetGo runs.
The SetNetGo interface that is integrated into the licensed MobilePlanner software.
l
Mobile Robot Software Suite Version 4.9.x
The Mobile Robot Software Suite includes all of the software used for Omron Adept AIV's and
the Enterprise Manager appliance, with the exception of the SetNetGo OS, which is supplied
as a separate software package.
12
Enterprise Manager 2100 User's Guide
14413-200 Rev. A
Advertisement
Table of Contents
