Table of Contents
Advertisement
GLXD4
Wireless Receivers
rf
group
link
channel
o / on
power
10
11
① Antenna
Two antennas per receiver. Antennas pick up the signal from the transmitter.
② RF Status LED
•
ON = Linked transmitter is on
•
Flashing = Searching for transmitter
•
OFF = Linked transmitter off or transmitter unlinked
③ Group Button
Press and hold for two seconds to enable manual group edit.
Receiver Screen
① Group
Displays the selected group.
② Channel
Displays the selected channel.
③ Transmitter Battery Runtime
Displays remaining battery life in hours and minutes.
Alternatively displays the following battery status:
•
CALC = battery life calculation
•
Lo = battery life less than 15 minutes
•
Err = replace battery
④ Audio Meter
Indicates audio signal level and peaks.
⑤ Gain
Displays transmitter gain settings (dB).
⑥ OL Indicator
Indicates audio overload, reduce gain.
2017/10/23
GLXD4
+
gain
-
mic out
instr out
12
13 14
④ Link Button
Press to manually link receiver to a transmitter or to activate the remote ID
function
⑤ Channel
•
Momentary press to start a channel scan
•
Press and hold 2 seconds to enable manual channel edit
⑥ LCD Screen
Displays receiver and transmitter status.
⑦ Gain Buttons
Press to increase or decrease transmitter gain in 1 dB increments.
⑧ Battery Charging Indicator
Illuminates when battery is in charging bay:
•
Red = battery charging
•
Green Flashing = battery charge > 90%
•
Green = battery charged
•
Amber Flashing = charging error, replace battery
⑨ Battery Charging Bay
Charges transmitter battery.
⑩ Power Switch
Powers the unit on and off.
Note: The battery continues to charges even when the switch is off.
⑪ Power Supply Jack
Connect the supplied 15 V DC external power supply.
⑫ Mic Out
XLR microphone output jack supplies microphone-level audio output.
⑬ USB Port
For uploading firmware updates
⑭ Instr Out
TRS ¼" (6.35mm) audio output. Connect to mixers, recorders, and amplifiers.
⑦ Transmitter Locked
Displayed when linked transmitter controls are locked.
⑧ Scanning
Indicates a scan is in progress.
⑨ Auto
Indicates that the selected group has backup channels available.
auto
Shure Incorporated
5/19
Advertisement
Table of Contents
