How To Use This Guide; How To Put It Together - Bissell PowerForce 6594 Series User Manual

How To Use This Guide

This User's Guide has been designed to help
you get the most satisfaction from your BISSELL
PowerForce Bagless. You'll find assembly and
operating instructions, safety precautions, as well
as maintenance and troubleshooting instructions.
Please read this Guide thoroughly before assembling
your vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they fit. Following
this User's Guide will greatly enhance your ability
to get the most performance from your BISSELL
PowerForce Bagless for many years.

How To Put It Together

The only tool you'll need to assemble your vacuum
cleaner is a screwdriver.
Attach Handle To Vacuum
Locate the vacuum Handle and remove the screw
1.
packet taped to the base of the Handle.
Stand the vacuum upright and place the Handle on the
2.
top of the vacuum body as shown.
Insert the screws provided from the screw packet into
3.
the existing holes on each side. Tighten securely with
a screwdriver.
Attach Vacuum Hose and Tools
Attach the Twist 'n Snap ™
1.
the base with the corresponding notches on the back of
the vacuum as shown.
Turn the Twist 'n Snap Hose to the right to lock the hose
2.
into place.
Grasping the Quick Reach Handle, slide the end of the
3.
Hose Wand onto the Hose Wand Base. Snap the Hose
into the Hose Clip.
NOTE: The Powerfoot will not operate
effectively unless the Hose Wand is
firmly attached.
Hose by lining up the tabs on
WARNING:
Plastic film can be
dangerous. To avoid
danger of suffoca-
tion, keep away from
babies and children.
5