Sony VGF-AP1 Series Operating Instructions Manual page 26

Setup item
Language
G-sense setting
Remote device contrast
System Information
Initialize Setting
Initialize My History
Initialize Rating
Restore Music Info
Firmware Update
HDD Format
26
Setting and description
Selects the language for the menus and commands.
Adjust G-sense pad parameters for optimum efficiency.
Sensing Area Setting
Select one of the following:
• Thumb operation
This setting works best when holding the unit with one hand and
operating it with your thumb.
• Flat
Response is evenly distributed over the button area.
Sensitivity Setting
Move the cursor to "Start" and press a G-sense pad button. Sensitivity
compensation is automatically set according to the G-sense pad
condition.
Adjusts the contrast of the remote control display.
Displays various information about the player, such as hard disk used/
free space, number of transferred songs, and firmware version.
Returns the unit to the factory default condition. When you select
"OK", all settings are returned to the default condition, except for "My
History", time, and rating data.
Clears the saved My History data of songs that were played.
Clears the saved song rating data based on play frequency and play
status.
Restores the music information.
Lets you update the firmware of the player. For details, visit the Web
site described on "Getting Help"(page 30).
Formats the internal hard disk drive of the player.
Notes
• When you format the internal hard disk, all data are removed.
You should back up the data if you use the player as an external
USB hard disk.
• If you format the internal hard disk with NTFS, the player will
become unable to play music.