Chapter 5 Display of each Value
5.1 Unit change
【Unit change】
Press <MODE> to shift display of main unit (M) and expansion units (1 to 7).
Main unit M
Lighting
5.2 Pulse count value / Pulse input status
・It displays present pulse input number.
Press <ITEM/△> to shift CH0 pulse count value and CH1 pulse count value.
Press <ITEM/△> continuously to shift pulse input status, press <ITEM/△> again continuously, it shifts
count value.
Example
CH0 count value
CH0 pulse input status
Input OFF
How to Reset Count value
・At count value display, holding down <SET> and <MODE> continuously makes count value clear.
Expansion unit
continuous press
Input ON
ON
<SET>
OFF
ON
<MODE>
OFF
KW2G Eco-POWER METER Expansion unit (Pulse input)
1
2
3
CH1 count value
CH1 pulse input status
Input OFF
to
7 Lighting
continuous press
Input ON
Reset