Setting Mode Explanation For Expansion Unit (Pulse Input); Mode 2 - Panasonic KW2G Eco-POWER METER User Manual

4.2 Setting Mode Explanation for Expansion unit (pulse input)

■The value with under line " " is initial setting among each setting value. ☆Set before measurement.

4.2.1 Mode 2

(Mode for setting of each parameter for pulse measurement)
Max. counting speed setting mode
Mode defines max. counting speed.
・Select from 30Hz/50kHz
Pre-scale setting mode
Mode defines pre-scale value used for changing count value.
・It can be set the range of 0.001 to 100.000. (Initial 1.000)
・The position of decimal point set with this mode is applied to count value and preset value.
ex) When " 0.010" (Last 2-digit) is set, the decimal point of count value and preset value has 2 digit
under decimal point.
Mode2 Setting flow chart
CH0 Max. counting speed setting mode
Press <ITEM/△> to change 50000(50kHz) ⇔ 30（30Hz）.
CH1 Max. counting speed setting mode
Press <ITEM/△> to change 50000(50kHz) ⇔ 30（30Hz）.
CH0 Pre-scale setting mode
Set pre-scale value using <ITEM/△>,<SET>+<ITEM/△>.
(0.001 to 100.000, initial: 1.000)
＊The position of decimal point set with this mode is applied to count value and preset value.
CH1 Pre-scale setting mode
Set pre-scale value using <ITEM/△>,<SET>+<ITEM/△>.
(0.001～100.000, initial: 1.000)
＊The position of decimal point set with this mode is applied to count value and preset value.
Hz
PSCL
Monitor
↓<MODE> continuous press
MODE 2 Lighting
↓<SET>
50000(50kHz)
↓<SET>
50000(50kHz)
↓<SET>
↓<SET>
↓<SET>
Monitor
KW2G Eco-POWER METER Expansion unit (Pulse input)
30(30Hz)
30(30Hz)
+
+
Increase
Decrease
Increase
Decrease