Shoulder Strap; Power Cord Storage; Transporting Cleaner - Bissell 4220 Series User Manual

Shoulder Strap

Select Models Only
The Shoulder Strap may be used while cleaning with the
Detachable Canister.
To attach the Shoulder Strap, wrap the Velcro ends attached to the
1.
bottom of the strap securely around the Canister handle as shown.
To obtain maximum strength, overlap the loose ends completely
and press securely in place.
The plastic Buckle must be positioned on top of the canister
2.
handle as shown in the illustration.
The length of the strap may be adjusted as required for comfort.
3.
CAUTION:
To reduce the risk of the shoulder
strap coming loose in operation
follow these instructions.

Power Cord Storage

When you are done using your vacuum, return it to the
Upright position and store the Power Cord.
Turn vacuum cleaner off (O).
1.
Unplug Power Cord by grasping the polarized plug
2.
(NOT the cord) and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of
3.
the Canister.
Clip molded plug to Power Cord to secure.
4.

Transporting Cleaner

To move your vacuum cleaner from room to room, put the
1.
Handle in the Upright Position, tilt the cleaner back on its
rear wheels and push forward.
The cleaner can also be moved by using the Carrying Handle
2.
on the Detachable Canister.
ug603-5567_3760-6850_905.indd 9 ug603-5567_3760-6850_905.indd 9
Buckle
CAUTION:
While the vacuum is in
use, warm air is emitted
through the Post-Motor
Filter on the back of the
Canister. The bottom of the
Canister may also become
warm. When using the
shoulder strap, to avoid
discomfort, position the
Canister so that these
parts are not directed
towards or touching
your body.
CAUTION:
Do not press the Release Button
while using the Carrying Handle to
transport the vacuum cleaner. The
Canister could detach causing
the rest of the vacuum to fall.
Carrying Handle
10/3/05 3:52:48 PM 10/3/05 3:52:48 PM
9