Brother MFC-T910DW Reference Manual page 25

Error Message
No Paper Fed
Again
Not Registered
Out of Fax Memory Print the faxes stored in the memory. For more detailed information,
Out of Memory
Paper Size
Mismatch
Refill Ink
Action
Clean the paper pick-up rollers.
For more detailed information, see the Online User's Guide: Clean the
Paper Pick-up Rollers.
You tried to access a Speed Dial number that has not been stored in
the machine.
Set up the Speed Dial number.
see the Online User's Guide: Print a Fax Stored in the Machine's
Memory.
If a fax-sending or copy operation is in progress:
• Press Stop/Exit and wait until the other operations that are in
progress finish, and then try again.
• Press c to select Partial Print to copy the pages scanned so
far.
• Print the faxes stored in the memory.
For more detailed information, see the Online User's Guide: Print a
Fax Stored in the Machine's Memory.
1. Check that the paper size you selected on the machine's display
matches the size of the paper in the tray.
For more detailed information, see the Online User's Guide:
Change the Paper Size and Paper Type.
2. Make sure you loaded the paper in a Portrait position, by setting
the paper guides at the indicators for your paper size.
For more detailed information, see the Online User's Guide: Load
Paper.
3. After you have checked the paper size and the paper position,
follow the LCD instructions.
If printing from your computer, make sure the paper size you selected
in the printer driver matches the size of paper in the tray.
For more detailed information, see the Online User's Guide: Print
®
Settings (Windows ) or Print Options (Mac).
The amount of remaining ink in one or more of the ink tanks is low.
The machine will stop all print operations.
Refill the ink tank.
For more detailed information, see the Online User's Guide: Refill the
Ink Tanks.
• You can still scan even if the ink is low or needs to be refilled.
19