Operation; Basic Operation - Optimus STA-795 Owner's Manual

OPERATION
BASIC OPERATION
Warning: To prevent possible ear injury and hearing loss, turn VOLUME to 0 before you turn or
receiver or change the signal source. After you turn on the receiver or change the signal source
just volume to a comfortable listening level.
Follow these steps to use the receiver.
1. Press POWER to turn on the receivers
power. One of the signal source indicators
comes on.
i
2. Press speakers A or B (or both) to select
the speakers. For example, to select the
speakers connected to the speakers a
terminals, press in A.
To turn off a pair of speakers, press the cor¬
responding button to release it.
Note: If you connect only one pair of
speakers, press only the corresponding
SPEAKERS button. Otherwise, you mute the
sound from the connected speakers.
3. Select the signal source as follows:
To listen to a source other than a tape deck,
be sure the TAPE MON indicator is off. If
necessary, press TAPE MON so that the in¬
dicator goes off. Then, press AM, FM,
phono, TV/AUX, or CD/AUX to select the
signal source. The corresponding indicator
comes on.
P&Ub
TV/AUX CO/AUX TAPC MOW
AM
1
ru
PHONO TV/AUX CO/AUX TAPP MON
t
To listen to a tape, press tape mon so that
the tape MON indicator comes on.
Am phono TV/AUX CO/AUX
]
PWCNO
TV/AUX CO/AUX
1
TAP*
To tune to a radio station, press TUNING UP
or TUNING down to tune up or down the
selected band. Or, press SEARCH and then
press TUNING UP Or TUNING DOWN to
search up or down for an available station.
See "Tuning to a Radio Station" for details
and for information about memory tuning.
<1
10
www.hifiengine.com