Yamaha Clavinova CVP-809 Owner's Manual page 88

Saving the Registration Memory as a Bank File
All of the panel settings are registered to the eight Registration Memory buttons as a single Bank file.
1
On the Home display, touch [] at the upper right corner to show the Registration
area, then touch the area to call up the Registration Bank Selection display.
NOTE
In general, Registration Memory data (Bank files) is compatible between the CVP-809 and CVP-805. However, the data
may not be perfectly compatible, depending on the specifications of each model.
The Registration Bank Selection display can be called up also by pressing the REGIST BANK
[+] and [-] buttons simultaneously.
2
Touch
For instructions on saving, refer to page 32.
NOTE
If you rename, move or delete the Registration Bank file which is linked to a Playlist Record, the Registration Memory Bank
cannot be called up from the Playlist.
Recalling a Registered Panel Setup
The saved Registration Memory Bank files can be recalled by using the REGIST BANK [-]/[+] buttons or
the following procedure.
NOTE
• When recalling setups that include Song, Style or text files selected from a USB flash drive, make sure that the appropriate USB flash
drive containing the registered Song, Style or text is connected into the [USB TO DEVICE] terminal. Before using a USB flash drive, be
sure to read "Connecting USB Devices" on page 100.
• You can also call up the eight setups by using pedals in any order you specify via [Menu]  [RegistSeq]. For details, refer to the
Reference Manual on the website (page 9).
1
Call up the Registration Bank Selection display (step 1 on page 88).
2
Touch and select the desired Bank on the display.
You can also use the REGIST BANK [-]/[+] buttons to select a Bank.
3
Press one of the green-lit numbered buttons ([1] – [8]) in the Registration Memory
section.
88
CVP-809/CVP-805 Owner's Manual
1
(Save) to save the Bank file.
2