Advertisement
Technical Instructions
Document Number 155-524P25
March 2, 2007
Operation,
Continued
Fan Speed
Fan Release Setting
Ventilation
Changeover
Adjustments
Mounting Style
Electrical Wall Box
(with wall box
Accessory
Warning/Caution Notations
Page 2
The fan control speed can be controlled two ways:
•
Manually, using the three-speed fan switch on the thermostat cover for continuous
operation.
(Low),
•
Automatically, by switching to the selected fan speed using the thermostat for
controlled operation. Prior to commissioning, the jumper position corresponding to
the thermostat function must be selected.
There are two jumper position choices on the printed circuit board:
−
Jumper SR1
−
Jumper SR2
When the ventilation function is selected (RAB10.1..), the heating and cooling contacts
are always open and the fan works at the selected speed.
The control algorithm can be selected with a switch located on the front of the controller
(change over switch).
The required temperature can be selected by a rotating setpoint adjuster at the front of
the thermostat.
High and low setpoint limit stops can be engaged to limit temperature range.
Product Number
RAB10.1UW
adapter)
Drywall
RAB10.1U
ARG70 Wall Box Adapter
WARNING:
CAUTION:
RAB10 Series Two-pipe Fan Coil Room Thermostat
(Medium),
(High).
Selected fan speed as continuous operation
Fan is switched at the same time as the valve
Auto
Table 1. Product Numbers.
Description
2-pipe; manual changeover; degrees
Fahrenheit and Celsius; fan only
function
2-pipe; manual changeover; degrees
Fahrenheit and Celsius; fan only
function
Personal injury, or loss of life may occur if
you do not perform a procedure as
specified.
Equipment damage, or loss of data may
occur if you do not follow a procedure as
specified.
Siemens Industry, Inc.
Advertisement
