Autoalert™ E-Mail Notification System - Sony PCV-LX900 VAIO User Guide (primary manual) User Manual

AutoAlert™ E-mail Notification System
The VAIO® Action Setup utility enables you to program your computer to notify
you when new mail arrives in your e-mail mailbox. The
turns red to indicate that new e-mail has arrived. For the AutoAlert E-mail
Notification System to work, you must use Microsoft® Outlook® Express as
your default e-mail software, and have an Internet Service Provider (ISP) with
dial-up capabilities set up.
As an alternative, you can program your AutoAlert E-mail Notification System to
have the Information LED indicate when it has successfully completed the task
of dialing up and connecting to receive e-mail. In this case, the Information LED
lights to indicate that your e-mail account has been successfully accessed,
regardless of whether or not you have e-mail. This feature is supported by the
preconfigured e-mail applications listed in the VAIO Action Setup utility.
✍
The e-mail software you choose to use with the PPK must be set as your default e-mail
software.
AutoAlert E-mail Notification System Software Restrictions
If you use software that requires use of a phone line
❑
The computer may not be able to disconnect the phone line due to
communication and server conditions.
❑
Monitor the status of the software when running the AutoAlert E-mail
Notification System, and manually disconnect the phone line if you notice a
malfunction. When using the timer to start the software, set the computer to
shut down or enter system standby mode after a certain length of time. This
allows the computer to disconnect the phone line if the computer does not
disconnect the line normally.
If you are using the timer to download e-mail automatically
❑
Set up your e-mail software to redial automatically if it does not connect the
first time.
❑
Set up your e-mail software to disconnect the phone line automatically when
all mail has been downloaded.
AutoAlert™ E-mail Notification System
Information LED
41