Sony VAIO Slimtop PCV-L400 User Manual page 20

20
Sony VAIO Slimtop LCD Computer User Guide
10
The Post Processing screen appears. Entering information on this
screen is optional. If you wish, you can set the computer to shut
down or enter system standby mode after the timer finishes
launching an application. Click the Help button for instructions.
When you have finished, or if you do not wish to choose any options
on the Post Processing screen, click Finish.
11
The Timer tab appears. Click Apply. The timer is now set to launch
the application you selected in step 5.
12
Click OK to exit PPK Setup.
Some software applications take longer than others to launch. It is advisable to confirm in
advance the amount of time your selected application takes to start.
Using the AutoAlert E-mail Notification System (VAIO Slimtop
LCD models only)
Your VAIO Slimtop LCD Computer can be set up to notify you with an
Information LED when new mail arrives in your e-mail mailbox. The
Information LED turns red to indicate that new e-mail has arrived. For
this AutoAlert E-mail Notification System to work, you must use
®
Microsoft Outlook
have an Internet Service Provider with dial-up capabilities set up. As an
alternative, you can program PPK Setup to set the Information LED to
turn on when PPK Setup has successfully completed the task of dialing
up and connecting to receive mail; this works with Netscape
®
Communicator
Outlook 98.
See "LCD (VAIO Slimtop LCD models only)" on page 12 for an
illustration showing the Information LED's location.
®
98 as your default e-mail software, and you must
®
4.5, Microsoft Outlook
®
Express, and Microsoft