Table of Contents
Advertisement
HANDLING THE UNEXPECTED
5. Place the compact spare tire (wheel
side up) under the vehicle body,
near the tire that needs to be
replaced.
6. Loosen each wheel nut about one
turn using the wheel nut wrench.
Setting Up the Jack
n
1. Place the jack under the jacking
point closest to the tire to be
changed.
2. Turn the end bracket clockwise (as
shown in the image) until the top
of the jack contacts the jacking
point. Make sure that the jacking
point tab is resting in the jack
notch.
94 |
3. Raise the vehicle, using the jack
handle bar and the jack handle,
until the tire is off the ground.
The vehicle can easily roll off the jack, seriously injuring anyone
underneath.
Follow the directions for changing a tire exactly, and never get under the
vehicle when it is supported only by the jack.
Do not use the jack if it doesn't work properly. Call your dealer or a
professional towing service.
The following instructions must be followed to use the jack safely:
• Do not use the jack with people or luggage in the vehicle.
• Use the jack provided in your vehicle. Other jacks may not support the
weight (load) or fit the jacking point.
• Do not use while the engine is running.
• Use only where the ground is firm and level.
• Use only at the jacking points.
• Do not get in the vehicle while using the jack.
• Do not put anything on top of or underneath the jack.
n
Replacing the Flat Tire
1. Remove the wheel nuts and flat
tire.
HANDLING THE UNEXPECTED
| 95
Advertisement
Table of Contents
