Adjustment - Denon AVR-X6200W Service Manual

ADJUSTMENT

Adjusting Idling Current
1. Preparation
(1) Prepare a DC voltmeter.
(2) Place the unit under normal usage conditions, away from highly ventilated areas such as next to an air conditioning
machine or electric fan.
The set requires an ambient temperature of 15℃ to 30℃ and standard humidity.。
(3) Settings of This Unit
• POWER (Power source switch)
• SPEAKER (Speaker terminal)
(Do not connect equipment such as speakers or dummy resistors.)
2. Adjustment Procedure
(1) Remove the top cover and turn V101(ALL Channel) of the AMP PCB counterclockwise( c ) as far as possible.
(2) Connect the DC Voltmeter to the test points.
FRONT-Lch
FRONT-Rch
CENTER ch
SURROUND-Lch
SURROUND-Rch
SURROUND-BACK Lch
SURROUND-BACK Rch
FRONT-WIDE/HEIGHT Lch
FRONT-WIDE/HEIGHT Rch
(3) Connect the power cord to an outlet. Next, press the power button to turn on the power.
(4) Set this unit as follows.
MASTER VOLUME
SPEAKER (Speaker terminal)
(Do not connect equipment such as speakers or dummy resistors.)
MODE
FUNCTION
(5) Turn VR101 clockwise ( x ) and adjust the voltage of the test point to "8.0mV ± 0.5mV DC" within 2 minutes.
(6) 10 minutes after the preliminary adjustment, turn V101 and set the voltage to "8.0mV ± 0.5mV DC".
(7) Adjust the variable resistance of each channel using the same method.
V101 V101
FHL SBL
N5813
L-AMP CONNECT PCB
STANDBY
No load
： N5813 10, 11pin
： N5823 2, 3pin
： N5813 8, 9pin
： N5813 6, 7pin
： N5823 4, 5pin
： N5813 4, 5pin
： N5823 6, 7pin
： N5813 2, 3pin
： N5823 8, 9pin
: "---" ( c min.) : turn counterclockwise to the lowest position.
: No load
: MCH STEREO
: DVD
V101 V101 V101
SL C FL
V101 V101
FR SR
R-AMP CONNECT PCB
96
V101 V101
SBR FHR
N5823